Hydraulic Presses

Deep drawing hydraulic press DEES HD-400

Deep drawing hydraulic press DEES HD-400 made in 2008. Manufacturer: DEES Hydraulics Industrial Co. Ltd. Made in Taiwan. Slide capacity: 400 tons; Slide table size: 2000x1800 mm; Bolster size: 2000x1800 mm: Slide stroke: 600 mm

Hydraulic press for cold extrusion of relief cavity model P7640

Hydraulic press for cold extrusion of relief cavity model P7640 made in 1990. Manufacturer: Pressmash; Nominal force: 1000 ton; Course of slide-block: 320 mm; Speed of slide-block: 8,5 mm/sec

Hydraulic press DUNKES HZ 100

Hydraulic press DUNKES HZ 100. Pressure: 100 tons; Throat: 380 mm; Stroke: 650 mm; Distance table/ram, max. stroke up, adjustment up: 950 mm; Table surface area: 800 x 700 mm

Hydraulic single-column press P6334

Hydraulic single-column press P6334. YOM: 1981. Nominal press force: 250 t; Max. rod stroke: 500 mm; Max. distance between table and rod - open press height: 800 mm; Distance between rod axis and bed: 400 mm

Hydraulic wheel mounting press PA6738

Hydraulic wheel mounting press PA6738. Nominal effort: 6300 kN; Slide stroke: 1090 mm; Distance between table and slide: 4000 mm; Nominal pressure of working liquid: 200 kg/cm2; Slide speed at idle stroke: 20-30 mm/s

Hydraulic press ERFURT PYE 100

Hydraulic press ERFURT PYE 100. Capacity: 100 tons; Table dimensions: 750x560 mm; Ram dimensions: 530x400 mm; Table height above the floor: 710 mm; Max shut height: 800 mm; Stroke: 500 mm

Hydraulic press ERFURT PYE 160 S1

Hydraulic press ERFURT PYE 160 S1. Capacity: 160 tons; Working pressure: 16 MPa; Speed upwards: 125 mm/sec; Speed downwards: 200 mm/sec; Slide stroke: 500 mm; Gab: 360 mm

Hydraulic press Gigant G2-250

Hydraulic press Gigant G2-250. YOM: 1993. Press capacity: 250 tons; Slide capacity: 250 tons; Capacity on reverse stroke: 25 tons; Table or slide stroke: 400 mm; Max. working pressure: 200 bar

Hydraulic press K25.018

Hydraulic press K25.018. YOM: 2012. Max. capacity: 2000 tons; Table size: 1000x1000 mm; Working stroke: 500 mm; Slide diameter: 900 mm; Idle stroke: 10 mm/sec (15 atm)

Hydraulic double action press LITOSTROJ HVC-2-250

Hydraulic double action press HVC-2-250. YOM: 1987. Capacity of slider: 250-2500 kN; Course of slider: 800 mm; Capacity of pillow: 100-1000 kN; Course of pilow: 320 mm; Table size: 1250x1000 mm

Hydraulic press DNEPROPETROVSK DA2238

Hydraulic press DNEPROPETROVSK DA2238. YOM: 1984. Nominal force: 630 tons; Slide stroke: 800 mm; Max. distance between table and slide: 1600 mm; Nominal force of ejector: at least 100 tons

Hydraulic press DNEPROPETROVSK DA2238A

Hydraulic press DNEPROPETROVSK DA2238A. Nominal force: 630 tons; Slide stroke: 800 mm; Max. distance between table and slide: 1600 mm; Nominal force of ejector: at least 100 tons; Stroke of ejector: 450 mm

Hydraulic press DB-2240

Hydraulic press DB-2240. YOM: 1987. Capacity: 1000 tons; Dimensions of the moving table: 1250x1250 mm; Course of moving traverse: 1000 mm; Max. distance between table and moving traverse: 2250 mm

Hydraulic press LITOSTROJ HKO-1-1000

Hydraulic press LITOSTROJ HKO-1-1000. YOM: 1979. Capacity: 1000 tons

Hydraulic press DNEPROPETROVSK D2240

Hydraulic press DNEPROPETROVSK D2240. Capacity: 1000 tons; Dimensions of the moving table: 1250x1250 mm; Course of moving traverse: 1000 mm; Max. distance between table and moving traverse: 2250 mm

Hydraulic press for bandage rings UZTM mod. 9606.00

Hydraulic press for bandage rings UZTM mod. 9606.00. Working force: 30000 tons; Number of steps: 2; Number of working cylinders: 4; Ram diameter of working cylinder: 1750 mm; Force of lifting cylinders: 250x4 tons

Hydraulic exhaust press LITOSTROJ HVO-2-160

Hydraulic exhaust press LITOSTROJ HVO-2-160. Capacity of slider: 160-1600 kN; Course of slider: 630 mm; Capacity of pillow: 63-630 kN; Course of pilow: 250 mm; Opened height: 1000 mm; Table size: 1000x1000 mm

Hydraulic sheet-stamping press model P233A

Hydraulic sheet-stamping press model P233A. Rated force of hydraulic cushion: 2500 kN; Motion ofthe cross-piece (drawing and clamping): 1700 mm; Max. distance between the table and the drawing cross-piece: 2600 mm

Hydraulic plate metal forming single action press model P3847

Hydraulic plate metal forming single action press model P3847 made in Russia. Manufacturer: TPM-Ryazan. Press is designed for plate metal material forming. Slide stroke: 1100 mm; Max distance between table and slide (daylinght): 2300 mm

Hydraulic double-sided press DUNKES HD 400

Hydraulic double-sided press DUNKES HD 400. YOM: 1994. Capacity: 400 tons; Slide stroke: 400 mm; Max. return stroke speed: 320 mm/s; Table size: 1500x1300 mm; Table height over floor: 830x1110 mm

Hydraulic press SACK & KIESSELBACH model OKP-500

Hydraulic press SACK & KIESSELBACH model OKP-500 made in 1986, Germany. Condition of the press is close to new press as it wasn't used in the factory. Capacity: 500 ton; Return run capacity: 45 ton; Stroke run: 500 mm